Payment & Shipping Terms:
|Material:||Carbon Steel||Capacity:||10 - 400 M / Min|
|Application:||Used For Recycling Waste Film Or Film Scraps||Power:||11 KW|
|Machine Weight:||700 KG||Product Shape:||Granulars|
|Power Supply:||3 PH 380 V 50 HZ|
Full Auto Computerized Program Control Film Scraps Recycling Machine
This is a fully automatic machine mainly used in a full auto productione line for recycling the waste, scraps and defective materials generated from processing CPE, PE, CPP, PO, PP, EVA, BOPA, POF, LLDPE and non-woven fabrics by plastic film processor for reuse mixed with original raw material, saving much production cost and avoiding environmental pollution problem.
Pelletizing by way of cold cutting without dust. It makes no change of material chemical composition and plastic property.
Available with the functions of self-traction and self-synchronization as well as auto granule length adjustment.
High capacity, low working noise and less power consumption.
The density of the granule processed is similar to that of original granules, which can be evenly mixed with raw materials without blocking material inlet and with hard generation of crystal lattices. 30~40% addition of the granules can be mixed with original raw materials for reuse.
Combined with production line to perform linkage with slitting machine or operated independently.
Traction precompression mechanism
|Independently controlled by inverter and motor to get the film into traction precompression mechanism, ensuring the production line free from being affected by possible failure resulted from main compression mechanism and cutter mechanism, sending the banded edge material to the main compression mechanism after precompression.|
|Main compression mechanism||Independently controlled by big power inverter and motor to press the film into firm banded material and send it for slicing by cutter.|
|Cutter mechanism||Independently controlled by inverter and motor to cut the materials into flaky granules by cutterhob with granule length adjustable from 3-8 mm.|
|Granules blowing mechanism||The finished granules are automatically blown by blower into the feed port of the production line.|
Comparisons with competitors’ machines:
|Machine type||H981 Recycling machine||Plastics crusher||Plastics recycling machine|
|Recycling mode||Pelletizing by way of cold cutting.||Direct mechanical crashing.||Extruded by heating the plastics.|
|Product shape||Granular||Flake or powder||Granular|
(Compared with original material)
Max addition amount
|30-40% (no much density difference between granules processed and original material)||5-10% (because of density smaller than plastics, easily suspended on top of the hopper to result in blocking material feeder and uneven plastic extruding)||10-15% (degradation of plasticizing property and product with crystal lattices)|
Separately operated by one person or combined with production line or link with slitting machine
|Low automation. Operated by one person, can’t be combined with production line.||Low automation. Operated by 2 or more persons, can’t be combined with production line.|
|Power consumption||5.5-11kw||7kw||Above 40kw|
|Product cleanness||Not polluted as directly pelletized by linking with production line.||Maybe polluted.||Most likely polluted due to complex process.|